ABSTRACT
Objective To investigate the application value of pancreaticojejunostomy with double-layer continuous suture in total laparoscopic pancreaticoduodenectomy (TLPD).Methods The retrospective crosssectional study was conducted.The clinicopathological data of 21 patients who underwent TLPD with pancreaticojejunostomy using double-layer continuous suture in the Second Hospital of Jilin University between January and December 2017 were collected.The anastomosis used Child method,and pancreaticojejunostomy,choledochojejunostomy and gastroenteric anastomosis in turn were done.Observation indicators:(1) surgical and postoperative recovery;(2) postoperative pathological examination;(3) follow-up and survival situations.Follow-up using outpatient examination and telephone interview was performed to detect postoperative survival and tumor recurrence or metastasis up to February 2018.Measurement data with normal distribution were represented as x±s.Measurement data with skewed distribution were described as M (P25,P75).Results (1) Surgical and postoperative recovery:21 patients underwent successful TLPD with pancreaticojejunostomy with double-layer continuous suture.The operation time,time of pancreaticojejunostomy and volume of intraoperative blood loss were respectively (352±25)minutes,(46±8)minutes and (168±34) mL.There was no intraoperative blood transfusion.The time of postoperative abdominal drainage-tube removal was (10.1±4.4)days.Of 21 patients,12 were complicated with biochemical fistula,and 3 with grading B of pancreatic fistula (pancreatic duct in type Ⅱ),and they were improved by inhibiting pancreatic secretion and drainage patency.There was no occurrence of biliary fistula,chylous fistula,postoperative bleeding,abdominal infection and delayed gastric emptying.The duration of postoperative hospital stay of 21 patients was (11.3± 2.0) days.(2) Postoperative pathological examination:surgical margins of 21 patients were negative.The pathological type:8,6,4,2 and 1 patients were diagnosed as distal bile duct cancer,ampulla cancer,duodenal papilla and duodenal cancer,pancreatic head cancer and neuroendocrine cancer of ampulla,respectively.(3) Follow-up and survival situations:21 patients were followed up for 3-12 months,with a median time of 7 months.During the follow-up,all the patients survived,and there was no tumor recurrence and metastasis.Conclusion Pancreaticojejunostomy with double-layer continuous suture is safe and feasible for TLPD,with advantages of exact anastomosis effect and good application value.
ABSTRACT
Objective To study the optimum combination of orientation parameter of total hip prosthesis and acetabular safe zone on condition that the range of motion for activities of daily living (ADL) is fulfilled.Methods A three-dimensional generic parametric and visually kinematic simulation module of THA was developed.Range of motion ( ROM ) of hip flexion ≥ 110°,internal-rotation ≥30° at 90° flexion,extension ≥30° and external rotation ≥40° were defined as the normal criteria for ADL.ROM of hip flexion ≥ 120°,internal-rotation ≥45° at 90° flexion,extension ≥30° and external rotation ≥40° were as the severe criteria.The ranges of changes in general ratios (GRs) of head-neck,femoral neck antevemion ( FNA ),operative inclination (OI) and anteversion (OA) of acetabulur components were 2.0-2.92,0°-30°,10°-60°,and 0°-70° respectively.Within the limits of the upper two activity criteria,the synchronous OA of acetabulur components was calculated with every 5°change in OI of the cup,and the collodiaphyseal angle ( CDD ) was set as 135°.The safe-zone of combination of acetabulur operative anteversion (OA) and inclination (OI) was defined as the area that fulfilled the two mentioned criteria of ROM without cup-neck impingement.All parameters were analyzed by using SAS 6.12 software.Results The safe zone of acetabdar angle rose with the increase of GRs of head-neck and the safe zone of severe criteria was smaller than that of normal criteria.When the CDD angle was 135°,the sum of average aeetabular OA and acetahular OI plus 0.816 times of the FNA equaled to 84.76° innormal criteria; and the sum of average acetabular OA and acetabular OI plus 0.873 times of the FNA equaled to 92.04° in severe criteria.Conclusions A high GR of head-neck greatly increases the size of safe-zone of acetabular angle.The higher demand of ROM of hip joint requires the smaller safe zone of acetabular angle,as can be corrected by increasing the GR of head-neck.The optimum combination between the sum of average acetabular OA and acetabular OI ( Y) plus FA (X)in the normal criteria and severe criteria can be estimated by using the following formulae:Y1 =-0.816X1 + 84.76 (R2 =0.993 ),Y2 =-0.873X2 + 92.04( R2 =0.999) respectively.
ABSTRACT
Objective To investigate the feasibility and clinical effects of suture anchors technique for acute distal avulsion fracture of patella. Methods From January 2007 to July 2009, 33 patients(18males and 15 females, ranging from 28 to 72 years, with an average of 49.3 years) were treated with the suture anchors technique. The average time from injury to surgery was 3.5 days(2 to 7 d). Injury reason: traffic accident in 12 cases, injured in daily life in 11 cases, sports injury 9 cases, no clear trauma history in one case. The Bostman evaluation system, follow-up X-ray, and knee mobility were used to analyze the clinical effects of suture anchors technique. Results All patients obtained the follow-up and the average time was 16.5 months(12 to 23 months ). One patient suffered foreign body reaction, and his wound healing was good after operation. The remaining patient wound healing was good. No complications were found in all patients,such as popliteal fossa artery, tibial nerves or peroneal nerve complication. Bostman patella fracture functional score 27.3±2.3 points at the sixth months follow up, 28 cases were rated as excellent, 5 cases were good, and the excellent and good rate was 100%. Six months later, X-ray showed bone healing, knee activity recovered well. The Range of Motion was extension for -2.5°±2.1° and flexion for 122°±5.3°. Conclusion Suture anchors fixation in treatment of acute distal avulsion fracture of patella has a good efficacy, safety and reliability advantages, and without the second operation. This technique provides an alternative in lower pole patella fracture.
ABSTRACT
Objective To investigate the feasibility and clinical effects of the pair ringer technology for bony avulsion of the posterior cruciate ligament under arthroscopy. Methods From January 2005 to July 2009, 23 patients were treated with the pair ringer technology for bony avulsion of the posterior cruciate ligament by arthroscopy. There were 15 male and 8 female, with an average of 39.3 years (ranging from 28 to 52 years). There were 4 cases of type Ⅱ, 14 type Ⅲ, and 5 type Ⅳ according to Meyer-Mckeever classification. The outcome measures were X-ray and MRI testing, Lysholm and Tegner knee function score. Results All the operations were finished in an hour. There were no complications as nerve injury or infection occurred in the study. The patients were followed-up for an average of 16.5 months (12-23 months). The Lysholm score rose from 50.3±6.1 preoperatively to 89.7±8.3 at the six months postoperatively (t=18.34, P=0.0007). The Tegner score rose from 1.7±0.5 preoperatively to 5.7±1.3 at the six months postoperatively (t=13.77,P=0.0008). All of the patients recover a functionally stable knee and have considerably improved knee function compared with their preoperative status. Conclusion The pair ringer technology under arthroscopy is a liable method for bony avulsion of the posterior cruciate ligament. This minimally invasive technology leads to rigid fixation, early rehabilitation.
ABSTRACT
ObjectiveTo study the anatomic characteristic of the attachment of medial patellofemoral ligament and its function in patellar stability. MethodsThirty adult cadaver knees were used for anatomic study, and the attachments of medial patellofemoral ligament were observed and measured. Results The femoral attachment of medial patellofemoral ligament was anchored to the bone between the medial femoral epicondyle and the adductor tubercle. The fibers here were thin and narrow, and became thick and wide to the anterior. The patellar attachment was in the superior two-thirds of the medial margin of the patella. The fiber here were the thickest and the widest. Conclusion The anatomic characteristic of the attachment of medial patellofemoral ligament was revealed, providing anatomical bases for surgery.
ABSTRACT
Objective To explore the isometry of grafts in PCL(posterior cruciate ligament)double-bundle re-construction under femoral tunnel shifting condition.Method Knee specimens from ten fresh frozen cadavers were used.PCL were divided into anterolateral bundles(ALB)and posteromedial bundles(PMB)to the inser-tion footorint.The anterior,postedor,proximal,distal and central points of the two bundles'femoral attachment site were respectivelyanchored to the middle of the PCL's tibial attachment site by the trial wires.Changes in length of the intra-articular part of the wires were recorded while the knee was flexed from 0°to 120°.Result The length changes in every point were compared.All of the maximal length changes of ALB's proximal,pos-todor points and PMB's proximal points were not greater than 2mm.No significant difference between the length changes of ALB's proximal point and posterior(P=0.864>0.05)was found.Conclusions The femo-ral tunnel for the PCL double-bundle reconstruction should be located as follows:ALB should be at the middle point of upper edge of femoral attachment site(proximal point),while PIVIB at the middle point of femoral attachment site(proximal point).
ABSTRACT
Objective To provide an anatomic evidence for the double-bundle posterior cruciate ligament (PCL) reconstruction, the sizes and locations of the attachments of the PCL to the tibia and the femur were measured. Methods We studied 30 cadaveric knees. PCLs were divided into anterolateral and posteromedial bundles to the insertion footprint, and those locations were measured and described. Results The distances from the center of the femoral insertions of the anterolateral and posteromedial bundles to the anterior margin of the medial femoral condyle were (8.52±1.81)mm and (11.63±1.81)mm. The vertical distances from the center of the femoral insertions of the double-bundle to the intercondylar roof were (4.67±0.55)mm and (10.32±1.23) mm. The vertical distances from the tibial insertion of the center of the double-bundle to the plane of the tibial articular surface were (8.43±1.21)mm and (14.52±2.31)mm. The distances from the medial margin of the articular cartilage of the tibial plateau to the center of the tibial insertions of double-bundle were (47.44±6.23)mm and (45.95±6.32)mm. The areas of the insertions of the anterolateral and posteromedial bundles on the femur were (107.12±15.25)mm~2 and (65.35±10.27)mm~2. The areas of the insertions of the double-bundle on the tibia were (50.07±11.33)mm~2and (51.08±10.22)mm~2. Conclusion The anatomic characteristic of the attachment of the anterolateral and posteromedial bundles was revealed, providing anatomical bases for surgery.
ABSTRACT
Objective To discuss biomechanical mechanism of reconstructed joint capsule ligament stabilizing hip joint by means of three-dimensional finite element analysis.Methods A finite element model of total hip arthroplasty(THA)including ischiofemoral ligament reconstruction was construtted by using finite element analysis software Unigraphics NX 2.0 and SolidWorks 2006 to simulate seated leg crossing and obtain peak resisting moment and range of motion prior to impingement.Results The current form of finite element model was characterized by large deformation multi-body contact,large interfacial sliding and high elasticity and could clearly reflect real anatomy and biomechanical behavior of ischiofemoral ligaments.Compared with model with only metal,model of ischiofemoral ligament reconstruction could reduce the peak polyethylene stress at the impingement site and at the head egress site by typically 17%and 31%respectively,increase peak resisting moment by nearly 57%and provide 2.29-fold stability.Conclusions As a discrete structure within the posterior capsule of the hip joint,the ischiofemoral ligament may be the most important contributor to the mechanical integrity of the posterior stability structure.The joint capsule ligament must be reconstructed in hip arthroplasty.
ABSTRACT
Objective To investigate effects of radiofrequency vaporization in arthroscopic treatment of knee disorders.Methods Arthroscopic surgery was conducted in 126 consecutive cases of various knee disorders by using the Arthrocare 2000 System,includng 72 cases of meniscus injury,20 cases of synovitis,15 cases of osteoarthritis,8 cases of patella subluxation,6 cases of synovial syndrome,and 5 cases of anterior cruciate ligament rupture.Results All the patients were followed postoperatively.Knee function evaluation with the Neer Scores showed excellent outcomes in 82 cases,good in 35 cases,and fair in 9 cases,the rate of excellent-or-good outcomes being 92.9%.Conclusions Application of radiofrequency vaporization under arthroscopy for knee joint disorders has advantages of simple and accurate performance,effective hemostasis,minimal invasion,and quick recovery of joint functions.
ABSTRACT
Objective To compare the clinical efficacy of traditional excision of involved lymph nodes and functional neck dissection in the treatment of patients with multiple cervical tuberculous lymphadenopathy(MCTLP).Methods From Jan 2006 to May 2008,76 patients with MCTLP who presented with focal liquefaction or sinus formation after ineffective conservative therapy were randomly divided into study group(functional neck dissection) and control group.Data regarding the 3-month recurrence rate,postoperative neck function,the mean hospitalization days and medical costs of the 2 groups were compared.Results There was significant difference in relapse rate 3 months postoperatively between study group(1 case,2.56%) and control group(7 cases,16.22%)(